6.6.7 Packet Tracer - Configure Pat.pka -

R1(config)# interface g0/0 R1(config-if)# ip address 192.168.1.1 255.255.255.0 R1(config-if)# no shutdown R1(config)# interface s0/1/0 R1(config-if)# ip address 209.165.200.226 255.255.255.252 R1(config-if)# no shutdown This is critical — PAT won’t work if you don’t tell the router which side is “inside” and which is “outside.”

R1(config)# interface g0/0 R1(config-if)# ip nat inside R1(config)# interface s0/1/0 R1(config-if)# ip nat outside Which traffic should be translated? All traffic from the LAN. 6.6.7 packet tracer - configure pat.pka

Have questions or corrections? Drop them in the comments. R1(config)# interface g0/0 R1(config-if)# ip address 192

Then check translations: