Epson Stylus T10 T11 Working Resetter May 2026

Have a different error code? If your lights are flashing alternately (one then the other), that is a paper feed jam. If they are flashing together (sync), that is the waste ink counter. Reset wisely.

The real solution? The . What is the “Resetter”? The “Epson Stylus T10/T11 Resetter” is a misnomer. It isn't a physical dongle (usually). It is a piece of proprietary Windows software called the Adjustment Program (AdjProg) . Epson Stylus T10 T11 Working Resetter

This software speaks directly to the printer’s maintenance port (not the standard print driver port). It bypasses the normal queue and reads the counters. More importantly, it writes zeros back to the "Protection Counter." Have a different error code

The official solution? Replace the sponge and pay Epson $100 for a mainboard reset. Reset wisely

Epson programmed a inside the printer’s EEPROM. When that counter hits a specific number (usually around 15,000 to 20,000 pages or 50 power cleanings), the printer hard-locks itself.

There are dozens of fake “Resetter.exe” files online that contain malware. We will get to the safe method below. Deep Dive: The Protocol The T10 and T11 use a variant of the ESC/P-R raster protocol. When the printer is in "Service Required" mode (flashing ink and paper lights simultaneously), it rejects standard print commands. However, it remains listening on USB for specific Reverse Engineering Transfer (RRT) commands.