How To Open Bootloader Mode On Itel A48 Review

Keep holding both buttons until the screen turns on. You will see the ITEL logo, then a dark screen with small text.

Release both buttons. You are now in Factory Mode or SPD Upgrade Mode – this is the bootloader-equivalent interface for Spreadtrum (Unisoc) chipsets used in the A48. How to Open Bootloader Mode on ITEL A48

On your ITEL A48, go to Settings > System > About Phone . Tap Build Number 7 times to enable Developer Options. Keep holding both buttons until the screen turns on

Press the Power button once to select it. Your device will now enter Bootloader/Fastboot Mode. Method 2: Using ADB & Fastboot Commands (For Advanced Users) This method requires USB Debugging to be enabled on your phone. You are now in Factory Mode or SPD

On your PC, open a command prompt (CMD) in the folder where you have ADB and Fastboot installed.

Type the following command and press Enter:

Press and hold the Volume Up (+) button and the Power button simultaneously.