Lm3915 Calculator Access

Then choose ( R_\textin1, R_\textin2 ) as a voltage divider. [ R_\textset = \frac12.5I_\textLED ]

Desired input at pin 5 for LED10 = 5.0 V (peak). Actual peak input = 1.414 V. Thus, we need gain , not attenuation. Instead, set RHI lower: Use a voltage divider from Vref to set RHI = 1.5 V (peak). Then: LM3915 Calculator

Choose R1 = 1.2 kΩ. ( R2 = 1200 \times (5.0 / 1.25 - 1) = 1200 \times (4 - 1) = 3600 \ \Omega ) (3.6 kΩ). Then choose ( R_\textin1, R_\textin2 ) as a voltage divider

[ V_\textth,n = V_\textRLO \times 10^(n-1)/10 \times \fracV_\textRHIV_\textRLO \times 10^9/10 ] Thus, we need gain , not attenuation

From Vref = 5V to RHI = 1.5V: Use voltage divider between pin 7 and ground, middle to pin 4. Choose Rtop = 10 kΩ, Rbottom = 4.285 kΩ (approx 4.3k).