Let’s correct the fault diagnosis realistically:
Author: Electromagnetics Education Lab Date: April 2026 Abstract Magnetic circuits are the hidden backbone of motors, transformers, and relays. Yet, students often struggle because magnetic quantities (MMF, flux, reluctance) lack the intuitive feel of voltage and current. This paper bridges that gap using a three-pronged approach: (1) the Ohm’s law analogy for magnetic circuits, (2) real-world fault problems (air gaps, fringing, saturation), and (3) a mini design challenge . Each problem includes a full solution with commentary on common mistakes. By the end, you will be able to analyze complex series-parallel magnetic circuits with confidence. 1. The Great Analogy: Why Magnetic Circuits Feel Strange | Electrical Circuit | Magnetic Circuit | Symbol | |---|---|---| | Electromotive force (EMF), ( \mathcalE ) (V) | Magnetomotive force (MMF), ( \mathcalF = NI ) (A-turns) | ( \mathcalF ) | | Current, ( I ) (A) | Magnetic flux, ( \Phi ) (Wb) | ( \Phi ) | | Resistance, ( R = \fracl\sigma A ) ((\Omega)) | Reluctance, ( \mathcalR = \fracl\mu A ) (A-turns/Wb) | ( \mathcalR ) | | Ohm’s law: ( \mathcalE = I R ) | Hopkinson’s law: ( \mathcalF = \Phi \mathcalR ) | — | magnetic circuits problems and solutions pdf
MMF: (\mathcalF = NI = 200 \times 2 = 400 \ \textA-turns) [ \Phi = \frac\mathcalF\mathcalR_c = \frac400398 \times 10^3 \approx 1.005 \ \textmWb ] Each problem includes a full solution with commentary
Let (\Phi_c) = flux in center limb, (\Phi_o) = flux in each outer limb. By KFL (Kirchhoff’s flux law): (\Phi_c = 2\Phi_o) MMF equation around center-outer loop: [ NI = \Phi_o (\mathcalR_c + 2\mathcalR_y + \mathcalR_o) \quad \text(wait – this is wrong because center flux splits) ] Better: MMF = (\Phi_c \mathcalR_c + \Phi_o (\mathcalR_o + 2\mathcalR_y)) – no, that’s inconsistent. The Great Analogy: Why Magnetic Circuits Feel Strange
Comparison: No-gap flux was 1.005 mWb → with gap, flux drops by ~80% ! Why? The gap reluctance dominates even though it’s tiny (1 mm vs 400 mm). Solution 3 – Fringing Effect (a) Effective gap area: (A_g,eff = 1.2 \times A = 1.2 \times 5\times 10^-4 = 6\times 10^-4 \ \textm^2) [ \mathcalR g,new = \frac0.001(4\pi\times 10^-7)(6\times 10^-4) \approx 1.327\times 10^6 ] Total reluctance: [ \mathcalR total = 3.98\times 10^5 + 1.327\times 10^6 = 1.725\times 10^6 ]
Ah – critical insight: If the core originally had , its reluctance is 497 kA-t/Wb. Then flux would be (250/497k \approx 0.503 \ \textmWb), not 1.2 mWb. So the “desired” 1.2 mWb must have come from a different core or higher current. The problem as written is inconsistent – an excellent teaching point: always check if numbers make physical sense .