Motorola Gm360 Programming Software 💎

Plug the RJ45 end into the microphone jack on the front of the GM360. Do not use the rear accessory connector for programming. 3. System Requirements & Setup | Requirement | Detail | |--------------|--------| | OS | Windows XP, Vista, 7, 8.1 (32-bit highly preferred). Windows 10/11 64-bit may fail to write. | | CPU | Any 1GHz+ (old software is not demanding) | | Port | USB 2.0 (for USB cable) or Native COM port (for serial RIB) | | Driver | For USB cables: Prolific PL2303 or FTDI driver (must match cable chip). |

| Cable Type | Part Number | Interface | Notes | |-------------|-------------|-----------|-------| | Rib-less USB cable | Aftermarket (e.g., BlueMax49ers, Kawa) | USB → RJ45 (front mic connector) | Most convenient for modern laptops. | | OEM RIB + Cable | RLN4008 (RIB) + RKN4105 (cable) | Serial DB9 → RJ45 | Requires real RS-232 port or USB-to-serial adapter. | motorola gm360 programming software

With the right tools, the GM360 is reliable and easy to program. Always read the radio first to save a backup before making changes. Last updated: 2026 Plug the RJ45 end into the microphone jack