RTM default recommendation: Fallback UART + USB bulk when available. | Mode | Data Generated | Bandwidth Requirement | Use Case | |-------|----------------|------------------------|------------| | PC-Only | 4 bytes per instruction | ~200 KB/s (at 100 MHz, 1:1000 sampling) | Locating infinite loops | | PC + Load/Store Address | 12–16 bytes per memory op | ~5 MB/s | Detecting wild pointers | | Register Delta | 2–8 bytes per taken branch | ~1 MB/s | Tracking boot state machine | | Full Execution Trace | All of above | ~50 MB/s (impractical for UART) | Post-mortem analysis with USB |
class RuntimeTraceMode HANDLE hTracePipe; // separate thread void OnTracePacket(BYTE* data, DWORD len) if(data[0] == TRACE_PC_PKT) uint32_t pc = *(uint32_t*)(data+1); auto sym = symtab.Find(pc); Log("PC: 0x%08X (%s)", pc, sym.name); ; Send CMD_SET_TRACE_CONFIG(addr_range_start, addr_range_end, mode_flags) before CMD_DOWNLOAD . 6. Use Cases & Results 6.1 Diagnosing Preloader Boot Loop Symptom: Device vibrates every 3 seconds, not detected by flash tool. RTM capture (PC-Only mode): smartphone flash tool -runtime trace mode-
Patch offsets: SPFlashTool.exe @ 0x2A3F4 – enable hidden menu, then Ctrl+Shift+T for trace console. RTM default recommendation: Fallback UART + USB bulk
Add a new USB class (0xFF, subclass 0x02) for trace data. In brom.cpp : Use Cases & Results 6